www.NickelScreen.com & www.RotaryScreen.cn
Brief Products Quality Contact Us Home Page

Quality

NO. ITEM TECHNICAL SEPCIFICATION
1 APPEARANCE

THE DEFEATS AS FURROW, FOLD, GREASY DIRT AND BURR ETC. SHOULD NOT BE FOUND IN THE SCOPE OF THE MAX PRINTING WIDTH ON THE NICKEL SCREEN.

2 CLEFT AT THE EDGE OF SCREEN

THERE IS NO CLEFT AT THE EDGE OF SCREEN.

3 DEGREE OF LIGHT PENETRATING

THE LIGHT CAN PASS THROUGH THE HOLE OF SCREEN EQUALLY. THERE IS NO HATCHING AND BLACK SPECKLE AT ALL THE SCREEN.

4

AMOUNT OF HOLE STRING TOGETHER

UPWARD THREE HOLES STRING TOGETHER SHOULD NOT BE FOUND IN THE MAX PRINTING WIDTH OF NICKEL SCREEN. THE TOTAL OF TWO AND THREE HOLES STRING TOGETHER NO MORE THAN AS FOLLOWINGS:

MESH NUMBER 60 80 100 105 125 125-V 135 155 155-V 165
PERIMETER(MM) 640~1017
2-3 HOLES NONE
?150 MM ROUND AREA NONE

5

AMOUNT OF BLIND HOLE

THE NICKEL SCREEN SHOULD MEET FOLLOW REQUIREMENTS IN THE MAX PRINTING WIDTH:

  1. THE BLIND HOLE IS NO MORE THAN 2 CONTINUOUS,
  2. THE AMOUNT OF TWO CONTINUOUS BLIND HOLE MEET FOLLOWINGS,
  3. THE AMOUNT OF BLIND HOLE SHOULD NOT EXCEED THE FOLLOWING REQUIREMENT IN OTHER ?150 ROUND AREA.
MESH NUMBER 60 80 100 105 125 125-V 135 155 155-V 165
PERIMETER 640~1017
SINGLE BLIND HOLE = 1
TWO ONTINUOUS HOLES NONE
AMOUNT IN ?150 MM ROUND HOLES NONE
6 HALF BLIND HOLE LIKE STRIPE

HE HALF BLIND HOLE STRIPE SHOULD NOT EXCEED 2 IN THE MAX PRINTING WIDTH OF NICKEL SCREEN, AND ITS TOTAL LENGTH SHOULD NOT EXCEED 40 MM, AND DISRANCE SHOULD NO MORE THAN 50 MM.

7 THICKNESS

AS THE SPECIFICANTION IN PRODUCTS PAGE

8 EQUALITY DEGREE OF THICKNESS

THE MAX PRINTING WIDTH = 1650 , TOLERANCE = 0.003
THE MAX PRINTING WIDTH > 1650 , TOLERANCE = 0.005

9 OPENING-HOLE RATE (%)

AS THE SPECIFICANTION IN PRODUCTS PAGE

10 BENDING TEST

THE SCREEN IS BENT IN OPPOSITE. THE BENDING DIAMETER IS 0.5 MM AND SCREEN SHOULD NOT BE BROKEN AND THERE IS NO CLEFT IN BENDING AREA.

11 ADHESION QUALITY

OUR  STABLE AND ELASTIC ROTARY NICKEL SCREENS ARE MADE OF ELECTROCASTED PURE NICKEL AND PROCESSED UNDER STRICT CONTROL. WITH SPECIALLY DEVELOPED SURFACE TEXTURE, OUR NICKEL SCREENS PROVIDE GOOD ADHESION FOR ALL KNOWN COATING EMULSIONS AND HAVE WHAT IT TAKES TO PRODUCE FLAWLESS PRINTING RESULTS WITH ALL TYPES OF DYES AND TEXTILES.

12 COATING & ENGRAVING

OUR NICKEL SCREENS ARE ALSO SUITABLE FOR LASER ENGRAVING. THEY CAN BE USED FOR USUAL DIMENSIONS. THEY CAN BE USED FOR TEXTILE AND WALLPAPER PRINTING AND SUITABLE FOR ALL THE COMMONLY USED COATING PROCESS. HIGH QUALITY OF PRINTING, BEST ELECTRONIC CONTROLLED COLOR DISTRICUTION, EXTREMELY SMOOTH SUPFACE, PRECISE FLOWER PATTERN, AND HIGH CLEARITY ARE ALL OUR SCREEN ADVANTAGIES WHICH LEAD TO ECONOMICALLY LOWER LOSS AND HIGHER PRINTING SPEED.

NOTE:

THIS SPECIFICATION IS ESTABLISHED BY CHANGZHOU GAOER NICKEL SCREEN FACTORY. IT IS A STRICTER FACTORY STANDARD THAN FZT92045-95(CHINESE ENTERPRISE STANDARD) AND ISO9002.